From Wikipedia, the free encyclopedia
Affinity chromatography can be used to:
- Purify and concentrate a substance from a mixture into a buffering solution
- Reduce the amount of a substance in a mixture
- Discern what biological compounds bind to a particular substance
- Purify and concentrate an enzyme solution.
The stationary phase is typically a gel matrix, often of agarose; a linear sugar molecule derived from algae. Usually the starting point is an undefined heterogeneous group of molecules in solution, such as a cell lysate, growth medium or blood serum. The molecule of interest will have a well known and defined property, and can be exploited during the affinity purification process. The process itself can be thought of as an entrapment, with the target molecule becoming trapped on a solid or stationary phase or medium. The other molecules in the mobile phase will not become trapped as they do not possess this property. The stationary phase can then be removed from the mixture, washed and the target molecule released from the entrapment in a process known as elution. Possibly the most common use of affinity chromatography is for the purification of recombinant proteins.
Batch and column setups
Binding to the solid phase may be achieved by column chromatography whereby the solid medium is packed onto a column, the initial mixture run through the column to allow setting, a wash buffer run through the column and the elution buffer subsequently applied to the column and collected. These steps are usually done at ambient pressure. Alternatively, binding may be achieved using a batch treatment, for example, by adding the initial mixture to the solid phase in a vessel, mixing, separating the solid phase, removing the liquid phase, washing, re-centrifuging, adding the elution buffer, re-centrifuging and removing the eluate.
Sometimes a hybrid method is employed such that the binding is done by the batch method, but the solid phase with the target molecule bound is packed onto a column and washing and elution are done on the column.
A third method, expanded bed adsorption, which combines the advantages of the two methods mentioned above, has also been developed. The solid phase particles are placed in a column where liquid phase is pumped in from the bottom and exits at the top. The gravity of the particles ensure that the solid phase does not exit the column with the liquid phase.
Affinity columns can be eluted by changing salt concentrations, pH, pI, charge and ionic strength directly or through a gradient to resolve the particles of interest.
More recently, setups employing more than one column in series have been developed. The advantage compared to single column setups is that the resin material can be fully loaded, since non-binding product is directly passed on to a consecutive column with fresh column material. The resin costs per amount of produced product can thus be drastically be reduced. Since one column can always be eluted and regenerated while the other column is loaded, already two columns are sufficient to make full use of the advantages. Additional columns can give additional flexibility for elution and regeneration times, at the cost of additional equipment and resin costs.
Affinity chromatography can be used in a number of applications, including nucleic acid purification, protein purification from cell free extracts, and purification from blood.
Various affinity media
Many different affinity media exist for a variety of possible uses. Briefly, they are (generalized):
- Activated/Functionalized – Works as a functional spacer, support matrix, and eliminates handling of toxic reagents.
- Amino Acid – Used with a variety of serum proteins, proteins, peptides, and enzymes, as well as rRNA and dsDNA.
- Avidin Biotin – Used in the purification process of biotin/avidin and their derivatives.
- Carbohydrate Bonding – Most often used with glycoproteins or any other carbohydrate-containing substance.
- Carbohydrate – Used with lectins, glycoproteins, or any other carbohydrate metabolite protein.
- Dye Ligand – This media is nonspecific, but mimics biological substrates and proteins.
- Glutathione – Useful for separation of GST tagged recombinant proteins.
- Heparin – This media is a generalized affinity ligand, and it is most useful for separation of plasma coagulation proteins, along with nucleic acid enzymes and lipases.
- Hydrophobic Interaction – Most commonly used to target free carboxyl groups and proteins.
- Immunoaffinity – Detailed below, this method utilizes antigens' and antibodies' high specificity to separate.
- Immobilized Metal Affinity Chromatography – Detailed further below, this method uses interactions between metal ions and proteins (usually specially tagged) to separate.
- Nucleotide/Coenzyme – Works to separate dehydrogenases, kinases, and transaminases.
- Nucleic Acid – Functions to trap mRNA, DNA, rRNA, and other nucleic acids/oligonucleotides.
- Protein A/G – This method is used to purify immunoglobulins.
- Speciality – Designed for a specific class or type of protein/coenzyme, this type of media will only work to separate a specific protein or coenzyme.
Another use for the procedure is the affinity purification of antibodies from blood serum. If serum is known to contain antibodies against a specific antigen (for example if the serum comes from an organism immunized against the antigen concerned) then it can be used for the affinity purification of that antigen. This is also known as Immunoaffinity Chromatography. For example if an organism is immunised against a GST-fusion protein it will produce antibodies against the fusion-protein, and possibly antibodies against the GST tag as well. The protein can then be covalently coupled to a solid support such as agarose and used as an affinity ligand in purifications of antibody from immune serum.
For thoroughness the GST protein and the GST-fusion protein can each be coupled separately. The serum is initially allowed to bind to the GST affinity matrix. This will remove antibodies against the GST part of the fusion protein. The serum is then separated from the solid support and allowed to bind to the GST-fusion protein matrix. This allows any antibodies that recognize the antigen to be captured on the solid support. Elution of the antibodies of interest is most often achieved using a low pH buffer such as glycine pH 2.8. The eluate is collected into a neutral tris or phosphate buffer, to neutralize the low pH elution buffer and halt any degradation of the antibody's activity. This is a nice example as affinity purification is used to purify the initial GST-fusion protein, to remove the undesirable anti-GST antibodies from the serum and to purify the target antibody.
A simplified strategy is often employed to purify antibodies generated against peptide antigens. When the peptide antigens are produced synthetically, a terminal cysteine residue is added at either the N- or C-terminus of the peptide. This cysteine residue contains a sulfhydryl functional group which allows the peptide to be easily conjugated to a carrier protein (e.g. Keyhole limpet hemocyanin (KLH)). The same cysteine-containing peptide is also immobilized onto an agarose resin through the cysteine residue and is then used to purify the antibody.
Immobilized metal ion affinity chromatography
Immobilized metal ion affinity chromatography (IMAC) is based on the specific coordinate covalent bond of amino acids, particularly histidine, to metals. This technique works by allowing proteins with an affinity for metal ions to be retained in a column containing immobilized metal ions, such as cobalt, nickel, copper for the purification of histidine containing proteins or peptides, iron, zinc or gallium for the purification of phosphorylated proteins or peptides. Many naturally occurring proteins do not have an affinity for metal ions, therefore recombinant DNA technology can be used to introduce such a protein tag into the relevant gene. Methods used to elute the protein of interest include changing the pH, or adding a competitive molecule, such as imidazole.
Possibly the most common use of affinity chromatography is for the purification of recombinant proteins. Proteins with a known affinity are protein tagged in order to aid their purification. The protein may have been genetically modified so as to allow it to be selected for affinity binding; this is known as a fusion protein. Tags include glutathione-S-transferase (GST), hexahistidine (His), and maltose binding protein (MBP). Histidine tags have an affinity for nickel or cobalt ions which have been immobilized by forming coordinate covalent bonds with a chelator incorporated in the stationary phase. For elution, an excess amount of a compound able to act as a metal ion ligand, such as imidazole, is used. GST has an affinity for glutathione which is commercially available immobilized as glutathione agarose. During elution, excess glutathione is used to displace the tagged protein.
Lectin affinity chromatography is a form of affinity chromatography where lectins are used to separate components within the sample. Lectins, such as Concanavalin A are proteins which can bind specific carbohydrate (sugar) molecules. The most common application is to separate glycoproteins from non-glycosylated proteins, or one glycoform from another glycoform.
- Baur, Daniel; Angarita, Monica; Müller-Späth, Thomas; Steinebach, Fabian; Morbidelli, Massimo (2016). "Comparison of batch and continuous multi-column protein A capture processes by optimal design". Biotechnology Journal. John Wiley & Sons, Inc. 11 (7): 920–931. doi:10.1002/biot.201500481. Retrieved 16 August 2016.
- Uhlén M (2008). "Affinity as a tool in life science.". Biotechniques. 44 (5): 649–54. doi:10.2144/000112803. PMID 18474040.
- bioWORLD, Concanavalin A – Specifically binds to mannosyl and glucosyl residues of polysaccharides and glycoproteins. See MSDS
- GE Healthcare Life Sciences, Immobilized lectin
|Library resources about
- , Affinity Chromatography Handbook by GE Healthcare Life Sciences