From Wikipedia, the free encyclopedia
|LOA||4,570 mm (15 ft 0 in)|
|Beam||1,530 mm (5 ft 0 in)|
|Draft||1,270 mm (4 ft 2 in) (foils down)15 mm (0.59 in) (foils up)|
|Hull weight||109 kg (240 lb)|
|Main & Jib area||11.61 m2 (120 sq ft)|
|Mainsail area||8.3 m2 (89 sq ft)|
|Jib / Genoa area||3.31 m2 (36 sq ft)|
|Infobox last updated: 19 September 2012|
The Albacore is a 4.57 m (15 ft) two-person planing dinghy, for lake and near-inshore day sailing. Hulls are made of either wood or fibreglass. The basic shape was developed in 1954 from an Uffa Fox design. Recent boats retain the same classic dimensions, and use modern materials and modern control systems.
A deep airfoil section centerboard and rudder make the Albacore highly manoeuvrable. The Albacore's rig uses swept spreaders supporting a tapered mast, a powerful vang, and adjustable jib halyard and other sail controls to depower in high winds. This adjustability enables light crews and heavy crews to race head-to-head in all but the most extreme conditions. It does not have a trapeze or spinnaker, and hence avoids the difficult handling of sport boats. The powerful rig and easily-driven hull give excellent performance over a wide range of wind and wave conditions.
The 2011 International Champion described the Albacore as a boat that is simple to get into at first, but one that will challenge the tuning and tactical skills of a sailor for the rest of their life.
About 8,200 Albacores have been built. The class is actively raced in the United Kingdom, the United States and Canada. Albacores are also used for adult and youth sail training, and for leisure sailing.
There is a particularly large concentration of Albacores in Toronto, Canada where the Friday night club series sees an average of 45 boats and peaks of over 50 boats on the start line every Friday during the summer sailing season.
Older Albacores are commonly found in vacation areas such as Ontario Cottage country.
The Class has a biannual International (World) Championship with the venue alternating between the three key countries where the class is sailed. The 2005 International Championship was held in Lyme Regis in Dorset, UK. The 2007 championship was held at the West River Sailing Club in Galesville, Maryland, USA. The 2009 championship was held in Largs, Scotland, UK. The 2011 International Championship was held in Toronto, Ontario, Canada and was won by US Sailors Barney Harris and David Byron. The 2013 International Championship will be held in Abersoch, Wales, UK.
Notable earlier manufacturers include Ontario Yachts, Skene, Woof, Kingsfield Marine, Fairey Marine, Grampian Marine, JD Young, Rondar and Whitby Boat Works.
The hull weight of an Albacore is 109 kg (240 lbs). Therefore, the Albacore can be road-trailered, with 1 or 2 Albacores behind a typical family car. With appropriate road-trailer design, the boat can be loaded and unloaded using only 2 people.
The Albacore is frequently used as a first boat for those who are just learning to sail, and as a very competitive racer for more advanced sailors.
Regatta results show that this class of boat is often sailed by husband/wife and parent/child combinations, and that some of the all-women teams are the most competitive in the class.
21st century rigging update
The rigging of early Albacores was very simple, including such basic features as a flat centreboard and barber-haulers. This rigging allowed only limited adjustability of sails.
The Albacore is a One-Design boat, with an "open rule" structure. Because it is a One-Design class, all Albacores ever made are considered identical and can race together without a handicap. However, the open rules mean that the new and existing boats can be improved or modified in many ways at the choice of the individual owner or manufacturer, provided that the basic dimensions and materials meet the class specification. In contrast, "closed" one-design boats such as the Laser are more tightly controlled and do not allow significant customization.
Modern Albacore designs have evolved sophisticated control systems for their running rigging and standing rigging. This greatly increases their versatility compared to earlier boats, and they can be sailed in 2 knots to 25 knots of wind.
- Epoxy foam sandwich fibreglass hull (Modern wood hulls are also manufactured, but are less common)
- Tapered aluminium mast
- Lightweight aluminium boom
- Automatic fly-away jib stick
- Moulded or wood/fiberglass composite centerboard with symmetric airfoil cross-section
- Kick-up rudder with symmetric airfoil cross-section
- Suction self-bailers (which empty a boat after capsize in 4 minutes)
- Adjustable continuous 16:1 vang and 12:1 jib halyard, rigged to side control panel
- 4:1 main-sail outhaul, 2:1 main-sail Cunningham, jib Cunningham
- Adjustable hiking straps for crew and helm
- Extended jib tracks for high- & low-aspect jibs
- Split-tail mainsheet
- Deck mounted 6:1 mast pre-bend adjuster and 2:1 rope mast ram
- International Albacore Association
- Canadian Albacore Association
- National Albacore Association (UK)
- United States Albacore Association
- Specs & Line Drawing
- Albacore Hull Registry
- Class Rules
- Classic Boat's guide to the Albacore class
- "Portsmouth Number List 2012". Royal Yachting Association. Retrieved 31 July 2012.
- "Centerboard Classes". US Sailing. Retrieved 31 July 2012.